Quebec Precious Metals Drills 1.45 g/t Au over 35.4 m at La Pointe Extension Discovery

   Download PDF   |   View documents on Sedar

  • Results received from winter drilling program further underline gold mineralized system continuity and significant exploration potential to the SW of the La Pointe deposit
  • Additional drill results received recently from the winter drilling campaign include (see Table 1 for the complete results of the campaign):
    PT-20-153: 1.45 g/t Au over 35.5 m incl. 4.1 g/t Au over 3.65 m
    PT-20-154: 6.80 g/t Au over 2.74 m incl. 11.75 g/t Au over 1.5 m
  • Field logging and assaying are pending from 11 drill holes (“DDH”) completed

MONTREAL, QC – June 18, 2020 – Quebec Precious Metals Corporation (“QPM” or the “Company”) (TSXV:CJC)(OTCQB:CJCFF)(FSE:YXEP) is pleased to report additional drill results at the La Pointe Extension discovery following the winter diamond drilling program on the 100% owned Sakami Project (the “Project”) in Quebec’s Eeyou Istchee James Bay territory. Significant additional drilling will be carried out this summer and fall to better define the exploration potential of this discovery. Field logging and assaying are pending from 5 DDH completed at the La Pointe Extension.

The La Pointe deposit and new La Pointe Extension discovery are part of a larger 2- kilometre-long mineralized trend on the Project striking SSW-NNE (see Figures 1 to 6). This discovery has potential kilometre-scale extensions that have been subject to very limited surface exploration and no drilling. Two high-grade surface grab samples (23.82 g/t Au, 9.52 g/t Au) located 700 m apart illustrate the potential of this area (see Figure 4).

The objective of the winter 7,448 m oriented-core drill program (see press release of April 21, 2020) was to expand the La Pointe deposit and the Simon new high-grade discovery.

The drilling results indicate that gold-bearing mineralization at the La Pointe Extension discovery and La Pointe have a similar geological character: hosted within a volcano-sedimentary sequence of the Yasinski Group (La Grande Subprovince) which is metamorphosed to amphibolite facies and strongly deformed by a regional WSW to ENE event. This sequence is in contact with sedimentary rocks of the Laguiche Group (Opinaca Subprovince) to the east. The lithologies are composed mainly of: 1) biotite-rich and silicified paragneiss with intrusions of granodiorite, tonalite and pegmatite, and 2) amphibolite (metamorphosed sedimentary iron formation and mafic volcanic rock). The gold mineralization is accompanied by disseminated arsenopyrite, pyrite and pyrrhotite and cross-cutting quartz-carbonate veinlets.

The Simon area is located 3 km NE of the La Pointe deposit and has a similar geological setting to the La Pointe and La Pointe Extension. Highlights of the drill results include 0.90 g/t Au over 18.0 metres. The drill results will be evaluated to identify additional drill targets to be tested. Field logging and assaying are pending from 6 DDH completed (see Figures 7 to 9).

The Project provides the Company with a controlling position over a 23-kilometre-long segment of a favourable geological contact and comprises of 259 claims (131.1 km2). It is located 570 km north of Val d’Or, 120 km east of the municipality of Wemindji, 90 km from the ÉlĂ©onore gold mine and 47 km northeast of the paved James Bay Road. Good infrastructure is present including major access roads, a hydro-power grid and airports. Drilling can be carried out throughout the year.

Quality Assurance/Quality Control

The drilling contract was awarded to Forage Val d’Or Inc. based in Val d’Or, Quebec. The DDH diameter is NQW. Drilling took place from January 15 to March 24, 2020. Quality assurance and quality control procedures have been implemented to ensure best practices in sampling and analysis of the core samples. The drill core was logged and then split, with one-half sent for assay and the other retained in the core box as a witness sample. Duplicates, standards and blanks were inserted regularly into the sample stream. The samples were delivered, in secure tagged bags, directly to the ALS Minerals laboratory facility in Val-d’Or, Quebec. The samples are weighed and identified prior to sample preparation. All samples are analyzed by fire assay with AA finish on a 30 g sample (0.005-10 ppm Au), with a gravimetric finish for assays over 10 ppm Au.

Qualified Persons

Normand Champigny, Eng., Chief Executive Officer of the Company, and Jean-Sébastien Lavallée (OGQ #773), geologist, Vice-President Exploration, director and shareholder of the Company, both Qualified Persons under NI 43- 101 on standards of disclosure for mineral projects, have prepared and approved the technical content of this release.

About Quebec Precious Metals Corporation

QPM is a gold explorer with a large land position in the highly-prospective Eeyou Istchee James Bay territory, Quebec, near Newmont Corporation’s ÉlĂ©onore gold mine. QPM’s flagship project is the Sakami project with significant grades and well-defined drill-ready targets. QPM’s goal is to rapidly explore this project to advance it to the mineral resource estimate stage.

For more information please contact:

Jean-François Meilleur
President
Tel.: 514 951-2730
jfmeilleur@qpmcorp.ca

Normand Champigny
Chief Executive Officer
Tel.: 514 979-4746
nchampigny@qpmcorp.ca

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Table 1: Sakami Project - Summary of significant gold results, La Pointe deposit and La Pointe Extension and Simon area - Press release of June 18, 2020.

Notes:

  1. All widths are drill indicated core length.

  2. DDH are generally planned to intersect mineralization as close to perpendicular to strike as possible.

  3. True widths are estimated to range from 75% to 90% of the down-hole length when DDH inclination and dip of the mineralized horizons are considered.

  4. All gold values presented are not capped.


La Pointe Deposit and La Pointe Extension
Hole #UTM E
UTM N
Length (m)
Azimuth (°)

Dip (°)
Number of samples
From (m)
To (m)
Interval (m)
Au (g/t)
La Pointe Deposit
PT-20-138375462
5895042
141
135
-50
94
No significant values
PT-20-139375532
5895041
60
135
-50
59
36.50
40.00
3.50
4.15
PT-20-140375496
5895077
174
135
-63
149
118.00
119.00
1.00
1.17
173.00
174.00
1.00
1.68
PT-20-141375536
5895107
132
135
-54
109
54.00
65.00
11.00
1.04
Including54.00
55.50
1.50
3.41
Including62.30
65.00
2.70
1.66
79.40
80.50
1.10
1.13
105.00
106.00
1.00
1.23
PT-20-142375496
5895008
60
135
-50
62
39.00
40.00
1.00
1.31
PT-20-143375623
5895020
201
0
-50
183
83.00
84.00
1.00
1.99
PT-20-144375602
5894893
276
330
-50
209
69.00
72.00
3.00
1.68
163.50
164.00
0.50
1.17
193.80
195.00
1.20
1.15
PT-20-145375650
5894909
216
335
-50
182
22.10
26.10
4.00
1.31
45.30
96.90
51.60
0.60
Including60.00
63.00
3.00
1.33
Including72.50
79.00
6.50
2.14
PT-20-146375695
5894940
270
0
-50
235
60.50
64.70
4.20
1.55
PT-20-147375812
5894959
276
0
-50
214
22.00
29.00
7.00
2.69
125.90
137.00
11.10
0.31
Including125.90
127.40
1.50
1.09
171.00
175.50
4.50
1.38
La Pointe Extension
PT-20-148374470
5894276
345
145
-50
316
54.00
55.20
1.20
1.06
241.20
241.60
0.40
5.61
279.00
280.50
1.50
4.06
288.90
296.50
7.60
2.91
PT-20-149374202
5894096
348
145
-50
280
241.45
242.15
0.70
2.19
252.50
253.20
0.70
5.06
PT-20-150374263
5894016
270
143.4
-50.7
210
189.50
221.00
31.50
0.49
PT-20-151373962
5893849
336
145
-50
300
231.90
312.00
80.10
1.15
Including269.00
293.95
24.95
2.21
Including288.00
293.95
5.95
4.63
PT-20-152374632
5894963
729
27
-53
130
700.50
714.00
13.50
0.52
PT-20-153374019
5893767
267
145
-50
222
152.10
187.50
35.40
1.45
Including175.00
179.10
4.10
3.65
PT-20-154*374017
5893857
366
145
-50
296
74.80
81.60
6.80
2.74
Including80.10
81.60
1.50
11.75
PT-20-155373935
5893799
294
145
-50
244
Logging and assays pending
PT-20-156373906
5893749
300
145
-50
To confirm
Logging and assays pending
PT-20-157373865
5893720
378
145
-50
To confirm
Logging and assays pending
PT-20-158373917
5893646
264
145
-50
To confirm
Logging and assays pending

*Logging and assays pending for part of the DDH

Simon area
Hole IDUTM E
UTM N
Length (m)
Azimuth(°)
Dip(°)
Number of samples
From (m)
To(m)
Interval (m)
Au (g/t)
SI-20-06376176
5897593
165
315
-60
148
7.50
11.50
4.00
0.37
23.60
31.50
7.90
0.30
48.00
105.30
57.30
0.52
including48.00
66.00
18.00
0.90
including84.50
105.30
20.80
0.57
SI-20-07376442
5897352
150
330
-60
121
NSV
SI-20-08376232
5897427
126
135
-75
39
78.50
80.30
1.80
0.72
SI-20-09376143
5897503
146.20
315
-50
124
30.50
31.60
1.10
1.31
SI-20-10376338
5897569
150
315
-50
48
No significant values
SI-20-11376555
5897372
159
315
-50
70
Logging and assays pending
SI-20-12376759
5897593
129
315
-75
48
Logging and assays pending
SI-20-13377064
5897440
201
315
-75
22
Logging and assays pending
SI-20-14377005
5897500
150
315
-50
24
Logging and assays pending
SI-20-15376934
5897308
150
315
-50
5
Logging and assays pending
SI-20-16376176
5897593
219
315
-72
To confirm
Logging and assays pending